It is well known that the windshield is a fundamental element for a vehicle to offer maximum safety and protection on every journey. Therefore, when there are signs of a broken windshield, it is extremely important to identify it and take action before the crack in question spreads and has negative consequences for both the car and its occupants.
For this reason, in this article from Ralarsa windshield workshop, we tell you first-hand how a proper installation and calibration of a windshield should be carried out in broad terms. Sometimes, simply repairing a windshield chip will be enough, but in other cases a full windshield replacement will be necessary. Keep reading below!
General aspects
If a broken windshield has not been properly replaced or repaired, in the best-case scenario water could enter the car in case of rain. But, in worse situations, the reality is that poor fitting of the front glass can reduce the car’s structural strength, potentially leading to a high risk of damage in the event of an accident.
When a collision occurs, the driver and passenger airbags deploy with great force, which, if the windshield is not correctly installed, could cause it to become detached. It could also interfere with the functioning of the airbags, preventing them from deploying. Without a doubt, this would lead to extremely serious consequences.
Installation and calibration
Although this task is always best carried out by a specialist technician, let’s now look at how a windshield should generally be installed. First and obviously, the old broken windshield is removed using specific tools designed for this type of service.
The vehicle’s frame is then cleaned and prepared for the subsequent installation of the new one, removing any residue and dust. For the installation itself, a specific adhesive is usually applied to the car’s frame, first ensuring that the glass is properly positioned. Once in place, it simply needs to be left to dry for a few hours. It is preferable not to use the car during this time to prevent unwanted movement of the glass.
As for calibration, this is a process in which the ADAS (Advanced Driver Assistance System) is correctly adjusted for the detection of people or obstacles while driving, as well as for automatic braking. This system integrates cameras installed in the windshield, which means that the windshield replacement must be carried out to perfection to maintain the effectiveness of the system.
What to keep in mind
Let’s return to what we said at the beginning: the windshield is vital in a vehicle. With this in mind, it is logical to insist that its handling should be carried out with care by professionals, such as those at our Ralarsa windshield workshop. So, why go to a specialised centre?
Professional technical team. In all our centres, we take care of our teams the same way we take care of your car. That’s why all our specialist agents have the necessary qualifications for the installation and repair of car glass. For example, in case of breakage, they will be responsible for determining whether a windshield replacement is necessary or, on the other hand, if just repairing a windshield chip will suffice.
Approved materials. A good team must go hand in hand with the best tools and materials. This is the case at Ralarsa, where we put our perfected and constantly evolving techniques into practice so your car is always in top condition.
Experience. At Ralarsa, a windshield workshop with extensive experience behind us, we have more than 250 workshops across the Iberian Peninsula. In addition, you can opt for our home service if the circumstances are extreme. We are at your disposal to help you!
